BHVHM - FLAW-FINDER SD-80 CLEANER
- MSDS: BHVHM
- Manufacturer: AMERICAN GAS AND CHEMICAL COMPANY LTD
- Product Name: FLAW-FINDER SD-80 CLEANER
- National Stock Number: 6810-00N010700
Product Identification
Product ID:FLAW-FINDER SD-80 CLEANER
MSDS Date:07/11/1986
FSC:6810
NIIN:00N010700
MSDS Number: BHVHM
Responsible Party
NORTHVALE, NJ 07647
Emergency Phone: 201-767-7300
Info Phone: 201-767-7300
Preparer: GEORGE KOSEL
Cage: EO527
Contractor
Telephone: 201-767-7300
Cage: 03530
Ingredients
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 96%
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT
TENDS TO REMOVE SKIN OILS POSSIBLY LEADING TO DERMATITIS.HIGH VAPOR
CONC MAY HAVE CENTRAL NERVOUS SYS EFFECTS.MINUTE AMOUNTS ASPIRATED
INTO LUNGS DURING INGESTION MA Y CAUSE SEVERE PULMONARY INJURY OR
DEATH.HALOGENATED HYDROCARBONS POSE HEALTH RISKS WHICH VARY FROM
PERSON TO PERSON.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION.SKIN:PROLONGED OR REPEATED
CONTACT REMOVES OILS POSSIBLY LEADING TO IRRITATION &
DERMATITIS.INGESTION:LOW ACUTE ORAL TOXICITY,MINUTE AMTS ASPIRATED
INTO LUNGS MAY CAUSE SEVERE PULMONAR Y INJURY OR
DEATH.INHALATION:HIGH CONC IRRITATING TO RESP TRACT,MAY CAUSE
HEADACHES,DIZZ,CNS EFFECTS,ARE ANESTHETIC.
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:EYES:FLUSH W/ CLEAR WATER FOR AT LEAST 15 MIN OR UNTIL
IRRITATION SUBSIDES.IF IRRITATION PERSISTS,CALL MD.SKIN:WASH WITH
SOAP AND WATER.REMOVE CONTAMINATED CLOTHING AND WASH BEFORE
REUSE.INGESTION:DO NOT INDUCE VOMITING.CALL MD
IMMEDIATELY.INHALATION:REMOVE FROM EXPOSURE AND CALL MD
IMMEDIATELY.IF BREATHING IS IRREGULAR OR HAS STOPPED,START
RESUSCITATION;GIVE OXYGEN IF AVAILABLE.
Fire Fighting
Flash Point:NONE
Lower Limits:15%
Upper Limits:7.5%
Extinguishing Media:FOAM,DRY CHEMICAL,CO*2,WATER SPRAY OR FOG.
Fire Fighting Procedures:WEAR PRESSURE DEMAND SCBA AND FULL PROTECTIVE
EQUIPMENT .COOL EXPOSED CONTAINERS WITH WATER SPRAY.AVOID BREATHING
VAPOR OR FUMES.
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:HYDROGEN
CHLORIDE,SMALL AMOUNT OF PHOSGENE AND CHLORINE.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES.RECOVER FREE
LIQUID.ADD ABSORBENT SUCH AS SAND,SAWDUST,ETC TO SPILL
AREA.VENTILATE CONFINED SPACES.KEEP MATERIAL OUT OF SEWERS AND
WATER COURSES.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:KEEP CLOSED WHEN NOT IN USE.DO NOT
HANDLE OR STORE NEAR HEAT,SPARKS,FLAME OR STRONG OXIDANTS.TO
PREVENT FIRE OR EXPLOSION RISK FROM STATIC (SEE SUP)
Other Precautions:NO SMKNG IN AREA.DO NOT USE IN AREA OF ARC
WELDING,OPEN FLAMES OR HOT SURF.HEAT/UV RAD MAY CAUSE FORM OF
HCL/PHOSGENE .EMPTY CONTR CONTAIN RESIDUE & ARE HAZ.DO NOT
PRESSURIZE,CUT,WELD,BRAZE,SOLD ER,DRILL,GRIND,EXPOSE TO HEAT, (SEE
SUP)
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL & GENERAL VENT NECESSARY TO KEEP AIR CONC BELOW TLV
.USE EXPLO-PROOF EQUIP.NO SMKNG/OPEN LIGHTS.
Protective Gloves:CHEM RESISTANT OTHER THAN NATURAL RUB.
Eye Protection:CHEM WORK GOGG,FACESHLD OPTIONAL .
Other Protective Equipment:USE CHEM RESIST APRON OR OTHER IMPERVIOUS
CLOTHING TO AVOID CONTAM REGULAR CLOTHING WHICH MAY CAUSE
PRLNG/RPTD CONTACT.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
HNDLG/STOR PREC:ACCUM/DISCHARGE,GROUND PRODUCT TRANSFER SYS ACCD TO
NFPA STD FOR PETRO PROD.SHELF LIFE:2 YR.AEROSOL:STORE IN COOL DRY
PLACE BELOW 120F,48C.DO NOT PUNCTURE OR INCIN AEROSOL CANS.OTHER P
REC:SPARKS,OTHER IGNIT SOURCES:MAY EXPLODE.DO NOT ATTEMPT TO
CLEAN.DRAIN,BUNG,& RETURN TO DRUM RECONDITIONER.
Chemical Properties
Boiling Pt:B.P. Text:162F,72.22C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:100 MMHG
Vapor Density:4.55,AIR=1
Spec Gravity:1.32 (WATER=1)
Evaporation Rate & Reference:1.33 (WATER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS LIQUID,SWEET ODOR.
Percent Volatiles by Volume:99+
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS,STRONG CAUSTICS,REACTIVE METALS LIKE ALUMINUM.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:HYDROGEN CHLORIDE,SMALL AMOUNT OF
PHOSGENE AND CHLORINE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE W/ FEDERAL,STATE
& LOCAL REGS .DISPOSE OF ABSORBED MATL AT APPRVD DISPOSAL
SITE/FACILITY.CAN BE RECLAIMED & RECYCLED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.